product: Silence FR Acoustic Fabric

Silence FR Acoustic Fabric

Silence FR Acoustical WallcoveringThe sound of silence has never looked so good! Silence FR Acoustic Fabric is a uniquely designed acoustical and textural wallcovering. Treated with a Flame Retardant backing, Silence FR Acoustic Fabric passes the UBC 8-2 test. Silence FR Acoustic Fabrics are Scotch Guar
ded with Teflon. Silence FR Acoustic Fabric features 40 fashionable colors and is surprisingly affordable, making it an excellent choice for a wide range of commercial applications. The vertical ribs create a sophisticated aesthetic with seamless installations. Silence FR Acoustic Fabric is sound absorbent, thermal efficient, and has additional features and benefits as listed.

Installation Procedure
Wall Preparation: Acceptable hanging surfaces must be clean, smooth, thoroughly dry and structurally intact. All loose paint and other wallcoverings must be removed. Freshly plastered walls must be drybefore application. It is important to prime walls with a primer that provides a solid color surface. This will avoid the possiblity of “strike through” of tape and spackle lines or other variances in the color of the wall. If there are any questions concerning the surface to be covered, a test installation is the recommended course of action.

Use clear adhesive. Do not dilute with water or other additives. If clay base is used, cleanliness must be maintained.

Silence FR Acoustic Fabric wallcovering should be table trimmed as to, balance seam between ribs. A sharp blade must be used at all times. Apply adhesive to the wall with a 3/8″ nap paste roller. Install fabric from top to bottom, between two plumb lines for ” absolute verticle alignment. Fabric should then be firmly pressed to the wall using a 1/4″nap roller to l insure maximum contact with adhesive. Complete installation instructions are included with each Silence FR Acoustic Fabric wallcovering shipment.

Silence FR is available in the following colors:
100 Series Colors (Page 1) | 100 Series Colors (Page 2)

Specifications Additional Properties
Contents: 100 Series 100% Polyester Passes UBC 42-2 and Phoenix Corner Burn Test
Backing: Acrylic Low static
Thickness: .25″ High abrasion resistance
Flame Rating: ASTM E-84 Class “A” Velcro compatible
Width: 54″ Passes NFPA 701 small scale
Weight: Silence FR 100: 24 oz. per linear yard Mildew and mold resistant
Acoustical Rating: ANSI-ASTM C423 N.R.C. .70 Non allergenic
Fray proof

Sound Absorption

125 250 500 1000 2000 4000 NCR
.06 .31 .70 .81 .69 .65 .65
Silence FR 100 Series Call for quote
There is a 30% restocking fee for returns. No returns under a full bolt.
Net 30 (approved), Amex, Visa/MC, Discover
Color samples available upon request.